SP/XL Firestop Fixing Bracket
The ROCKWOOL SP FireStop System has been created to maintain essential fire compartmentation. As a system, it is designed to form cavity fire stops within buildings and provide crucial fire resistance and compartmentation. The product provides a tested fire stopping solution offering a unique lateral compression to facilitate a close fit between substrates within masonry or curtain wall constructions. To ensure compliance with the fire test certification, SP/XL FireStop Fixing Bracket must be used to install the product as they are specifically designed to maintain the 2 hours fire resistance in cavities up to 600mm. The SP FireStop Slabs can be cut on site to suit the cavity size using a sharp knife or insulation saw. The SP/XL FireStop Fixing Brackets should be installed in accordance with the guidance given in the technical datasheet and fixed accordinging using fixings suitable for the substrate.
- Versatile – the SP Firestop System is suitable for both horizontal and vertical cavity firestop applications and to maintain compartment lines.
- Easy on-site use – the SP/XL FireStop Fixing Brackets are designed to be re-profiled by hand, during construction.
- Flexible - the SP FireStop System may be installed horizontally or vertically and is suitable for cavity widths between 50mm and 600mm* SP Firestop can also be used horizontally in cavity widths up to 1000mm* Please contact ROCKWOOL Technical Solutions for fire resistance ratings in voids over 600mm wide.
- Up to 2 hours fire resistance* – the SP/XL Firestop Fixing Brackets contribute to the system’s significant protection against fire, including the passage of smoke.
- SP Firestop has been successfully tested horizontally in cavity widths up to 1000mm. Please contact ROCKWOOL Technical Solutions for fire resistance ratings in voids over 600mm wide.
*Subject to the application
